Toyota MR2 Community Archive
MK1 Interior
So you want to install Mk3 seats in your Mk1. It’s really not that hard.
Tools needed:
Torque wrench that can do 27 ft/lbs.
14mm socket/wrench
14mm combination wrench (ratcheting is a definite plus)
Drill (and a metric buttload of crappy bits or 3-4 really good ones)
Safety glasses (of course)
[…]
ere’s a write-up that I’ve been meaning to get to for a while now. Every car has different seat mounting locations. Therefore aftermarket seat manufacturers must sell brackets specific to the car. Sometimes this...
After getting tired of looking at the old dull headliner and dirty sunvisors for the past 10 years, I decided to try out the Vinyl & Fabric paint/dye. You can purchase this at your...
Twosrus sells replacement motor gears for power windows, which is a very common failure on the aging MR2s. However, the regulator gear could be the one causing your problems. This gear is irreplaceable and...
I had a interior trim piece that was dented up pretty bad. About 5-7 years ago, I remember trying to remove it and bending it in the process. I wasn’t to kind on my...
Tired of the intermittent setting not working? Wipers not returning to their rest position after you turn the switch off? Most likely all you need is this simple repair. Do this first before spending...
As many of you MKIers know, the door triangle pieces break over time. Finding old ones in a junkyard that aren’t broke is a very difficult task. And gluing them back on is only...
After 17 years, my shift boot has gotten pretty ratty. So I purchased a new one made from soft calf leather from a person on the MR2 forum. I had the option of picking...
