20V Blacktop Dyno Results

by Eric Southers | July 25, 2005 12:00 pm

Here are the results: 137whp & 111wft-lbs. This is with 103 octane unleaded gas. I don’t really trust the A/F ratio measurements. The tool they use for that is a little suspect, since it was barely even stuck in the tailpipe. After the dyno, I used a friend’s wideband O2 and the results were much richer.

So, this is pretty much in line with what Toyota said for the 20V blacktop, 165hp at the flywheel: (1 – 137/165) * 100% = ~17% drivetrain loss. Which is about right for the AW11 drivetrain.

Source URL: https://midshiprunabout.org/mk1/20v-blacktop-dyno-results/

---