by WhyT | August 16, 2008 2:20 pm
I used regular wrenches but it’s not advised.
1. Completely loosen fittings on both sides of the clutch line.
2. Remove both retainers.
3. Remove old line.
4. Install new line in its place making sure to align the fittings correctly.
5. Reinsert both retainers.
6. Tighten down both fittings.
Now you will need to refer to my How To: Bleed The Clutch.
Source URL: https://midshiprunabout.org/mk3/how-to-change-the-clutch-line/
Copyright ©2021 Midship Runabout unless otherwise noted.