4AGZE Swap Wiring Info
Okay… this is going to be long, but hopefully it will help you out. Disclaimers/Notes: – All references are to the way my ’86 NA (manufactured 8/85) were wired. The references are to the...
Tagged: MK1 MR2 Write-ups
20V Blacktop Swap – Cooling System
Another one of the main fabrication hurdles with the swap (but one of the easiest and funnest!) is routing the coolant system lines. Luckily, the input & output of the water system is on...
20V Blacktop Swap – Miscellaneous Info
Here’s a summary of the smaller things that you will need to do that aren’t big enough for their own page: Fuel line Contrary to what was previously on this page, the 16V fuel...
20V Blacktop Swap – Wiring
The most time consuming part of the swap. I was somewhat reluctant about doing this swap because I was afraid of the daunting task of the wiring. However, once I got into it it...
20V Blacktop Swap Exhaust
For the exhaust, you need to decide if you want to use the 16V manifold or the 20V. The 20V manifold is a much more efficient design, however involves more customization that the 16V....
How To: Install Front Bushing
Going to be replacing all the bushings with the TRD bushing set, while I have my suspension apart. I’ll try to show the removal of the various suspension pieces. Things may be a little...
Replace Ball Joint
Here’s a step-by-step guide to replacing the lower ball joints. The pictures below are with the strut assembly removed as I am doing the entire suspension work at the same time & had just...
Rear Interior Trim Piece & Interior Light Lens
I had a interior trim piece that was dented up pretty bad. About 5-7 years ago, I remember trying to remove it and bending it in the process. I wasn’t to kind on my...
How To: Replace Oil Cooler Hoses
I’ve been waiting till its time to change my oil again to replace the oil cooler hoses, as these guys have been leaking for some time. I decided to replace them with Aeroquip Stainless...
FWD Transmission Conversion for the MR2
Here’s what you will need to do to convert a front-engine FWD transmission to work in the mid-engined MR2, specifically the C56 transmission. If you sit the stock C50/52 next to the C56, you...