Toyota MR2 Community Archive
I followed the service manual as well as the excellent write up on this site: http://www.mrtwo.net/mr2modproject/mr2modproject.htm to remove the engine out of the bottom of the MR2. The reason for removing the engine was...
Draining: Complete service manual instructions can be found here. The MR2 has four drain plugs, one in the radiator, two in the piping underneath the car, and one in the engine block. When I...
Here are some notes pertaining to adjusting the valve clearance on a 1991 Toyota MR2 Turbo. Start off by removing the basics – the strut tower brace, and air tubes leading to the throttle...
A few pictures of an engine being torn down.
Some of these pics are out of order, so you may see a belt in a pic that should have been removed, or a timing cover. I took these pics over a time period...
Pat decided to use Evan’s NPG+ as a coolant in hopes of preventing detonation that chronically plagues 3SGTE’s when they reach the 300 rear wheel horsepower limit. Pat is going to be using a...
