How To: Remove Rear Bumper
(1) – To start with I disconnected the rear lights; this is done by removing the2 screws at the front and side of the main light unit.There is also a small plastic spigot (location...
Midship Runabout
How To: Install Stereo
When my lovely new Roadster arrived, it had no stereo fitted. After a bit of investigation I have found out that the stereo unit is a “Point of Entry” part. i.e. All Roadsters are...
Soft Top Straps
This can be easily seen by looking at the soft-top when it is folded down fully or by looking in the hood lining when the hood is partially down (See pictures below.) You will...
Pelican Racing Front Grill
Heres the one i made from some Foliatec Racing Mesh to start with. The results came out ok, but as you can see after a year or so it looking pretty tatty. So time...
How To: Install a Carbon Fiber Scuff Plate
What the kit contains: 2 x Garnish Film Strips (Left & Right Identical) 1 x 3M Adhesion Promoter 1 x Applicator Thoroughly clean the surfaces of the plastic scuff plates with methylated spirits. Treat...
New Gear Lever Gaiter
If you haven’t already got your new gaiter, then give Rhonsmr2 a PM on the Forum, or do a search for the [FS] post using “gaiter”. She can do new leather gaiters in different...
TTE Lowering Springs
Having recently fitted the TTE springs, I thought Iād share the experience and this article briefly describes the process I followed. Disclaimer: I and the club will not accept any responsibility if you follow...
Front Brake Pads and Disks
Here is a guide I compiled whilst fitting new front brakes to the front of my roadster at the beginning of the year (only just getting round to putting the guide together ) If...
TRD Member Braces
I just installed the TRD member braces on my car, and have a few bits to add to Whelps “how-to” on Spydermagazine.com First of all the front brace: Its a doddle, if you can...
Precat Information
Whilst the MR2 Roadster has very few flaws as either a fun cheap sports car or as a precision tool to hit the track with, there is one thing that we as a Club...