Engine Drop Prep
I finally saved money to do something with my black car. I’m undecided as to if I should rebuild, or buy a GenIII clip. I really believe the GenII motors are alot less stout...
Tagged: drain
How To: Install a Clutch in a 2nd Generation Toyota MR2
This article is a mish mash of several other articles, and many clutch installs. I put this here to help someone perform their first clutch job, and is not intended to replace the BGB....
Hose From Hell Replacement Without Removing any Part of the Turbo
Note: Hose from Hell is also known as HFH. Description of HFH The HFH is a simple 5 inch coolant hose on the MR2 Turbo that usually wears out and burts sometime after...
How To: Flush Coolant
Pat decided to use Evan’s NPG+ as a coolant in hopes of preventing detonation that chronically plagues 3SGTE’s when they reach the 300 rear wheel horsepower limit. Pat is going to be using a...
MKII Turbo Engine Drop Pics
Shane Craddock (Gecko 2) had decided to fix an oil leak on his MKII Turbo engine. The leak appeared to be in the headgasket area, and having pulled the head from inside the car...