Toyota MR2 Community Archive
Tools needed:
* Various sockets, wrenches, pliers & ratchet
* Cheater bar for those stubborn nuts & bolts
* Bench Vice
* Monkey wrench or large channel locks
* Dremel tool (maybe, see step 6)
* Spring insulators x2
* Bumpstops x2
It’s a good idea to clean up the throttle body every so often, as the oil vapor in the PCV system condenses on the cooler walls of the intake. This leaves a nice oily...
I was bored today, and looked for something to do. Decided to clean up the bracket that holds down the battery. As you can see, there’s lots of battery acid corrosion along one side...
I finally saved money to do something with my black car. I’m undecided as to if I should rebuild, or buy a GenIII clip. I really believe the GenII motors are alot less stout...
This part of the engine drop process is a little more intensive than the drop prep. From here on out, it’s helpful to have friend to lend a hand. As always, be sure to...
The intercooler can be tough to get in and out of there. 1. Remove the Intercooler Fan with the 3 bolts. 2. Remove the passenger side Engine Hook. Here it is. 2 medium bolts...
Some pictures taken during the install of a cam seal.
Some of these pics are out of order, so you may see a belt in a pic that should have been removed, or a timing cover. I took these pics over a time period...
This article is a mish mash of several other articles, and many clutch installs. I put this here to help someone perform their first clutch job, and is not intended to replace the BGB....
After 17 years, my shift boot has gotten pretty ratty. So I purchased a new one made from soft calf leather from a person on the MR2 forum. I had the option of picking...
