Tagged: MR2ROC

0

Soft Top Straps

This can be easily seen by looking at the soft-top when it is folded down fully or by looking in the hood lining when the hood is partially down (See pictures below.) You will...

0

Pelican Racing Front Grill

Heres the one i made from some Foliatec Racing Mesh to start with. The results came out ok, but as you can see after a year or so it looking pretty tatty. So time...

How To: Remove Rear Bumper

(1) – To start with I disconnected the rear lights; this is done by removing the2 screws at the front and side of the main light unit.There is also a small plastic spigot (location...

0

TTE Lowering Springs

Having recently fitted the TTE springs, I thought Iā€™d share the experience and this article briefly describes the process I followed. Disclaimer: I and the club will not accept any responsibility if you follow...

0

Front Brake Pads and Disks

Here is a guide I compiled whilst fitting new front brakes to the front of my roadster at the beginning of the year (only just getting round to putting the guide together ) If...

1

Precat Information

Whilst the MR2 Roadster has very few flaws as either a fun cheap sports car or as a precision tool to hit the track with, there is one thing that we as a Club...

0

Heated Seats

After exchanging a couple of PM’s with Darth Paul, who has already fitted these some time ago, I had a crack at it myself… I think its safe to say its not nearly as...

Changes by Year 0

Changes by Year

2000 – Mk3 is launched in Europe, having previously been launched in Japanese and US markets. A small modification is made after the car has been rolling off the lines for a while, when...