Toyota MR2 Community Archive
Well I had a fraying throttle cable that was getting hung up at times when backing off the throttle… After further inspection I noticed that the throttle cable was fraying and was getting caught up not letting the cable slide smoothly to close the throttle plate. Well after a call to “SATAN” I was quoted around 80 bux for about 1.5feet of throttle cable. A bit much if you ask me, and im sure I could do this for cheaper.
These are not my steps they are from another AW11 owner. Automatic transmission to manual transmission (1985 -86 MkI) Extra tools I had to buy in addition to my normal hand tools: Toyota Repair...
I wrote this up last year and just joined this board not too long ago so I wanted to share this with you guys. Well a lot of people have been asking how to...
Vin information for 1985-1995 Model MR2s.
First off, do not be affraid to do this conversion. Everyone who says it is difficult has probably never attempted it. Everything bolts on, and you can even keep the center console from the...
To start with: Gotta have tools. The more tools you have the better. Basic tools are essential; socket set, wrench set, screwdriver set, test light, mulitmeter volts/ohms, jumper wires ( make yourself a set...
Just replaced my speedometer cable today. It ended up being pretty easy, but as always whenever you’re doing something for the first time, it takes longer. 1. disconnect the cable from the tranny. It’s...
Are you thinking of buying a modified MR2 Turbo? It may be a fast way to get the power you always wanted without going through the effort of building one for yourself. It may...
Changes that need to be made to accommodate the 20v by system 1. Exhaust -Silvertop The complete 16v exhaust system can be used with the 20v silvertop. The only needed modification will be to...
Modifying your 5S-FE There are a lot of nay-sayers out there that say the 5S-FE motor is a weak non-performance economy motor and can’t handle the boost. I don’t agree with this assumption and...
