Tagged: MKII MR2 Mod Project

0

K-Sport Coilovers

I picked up some K-Sport Coilovers from voiceofid on the MR2OC Forums. They have threaded tubes that allow you to raise or lower the car without losing spring/strut travel. The Rebound/Damping adjustments are tied...

0

Exhaust Controller Valve

In order to quiet down my new exhaust, I picked this up off eBay, almost ordered the 2.25″ one, so make sure you get the right size. The valve opens or closes at the...

4 EGT to 1 Switched Gauge Install

Forward: We do NOT reccommend drilling into your ex. manifold with it on your car. Shane and Pat pulled the motor shortly after, and when Shane pulled the head, he found evidence that this...

0

Cam Degreeing

Here are some tips and info on how to degree cams for the 3SGTE. This article does not cover cam install, just the degreeing process for aftermarket cams. If you do not degree your...

0

Invincashield Install

Invincashield is a product made by 3M. This product goes by other names, and/or is made by other brands (ie Stongard). You can find some info on a MR2 Spyder specific installation here http://www.smiley.net/spyder/invinca.htm...

0

Oilpan Airflow Mod

The purpose of this mod is to allow the underbody airflow to hit the front of the oilpan, and carry away some of the heat in the oil. The mod was found on a...

Supra Fuel Pump Power Mod

This mod is intended to supply the maximum amount of voltage available to the fuel pump, and upgrade the wires when using a Supra pump which usually pulls right around 20 amps, by getting...

How To: Install Thermostat

Real quick pics of a thermostat change in a MKII T. There are only 2 bolts holding the thermostat in place, but there are some peripheral items that removal of will make the thermostat...

0

TVIS Disconnect

TVIS Disconnect = MID RANGE GRUNT There are really only a few free mods, add this one. Give it a shot, if you don’t like it, switch it back! On hearsay, we disconnected our...