Toyota MR2 Community Archive
reddy 720cc top feed injector. Part# 1350072 On the right are the fittings that come with the HKS Fuel Rail. Insulator, bung/adapter, o-ring. NOTE: The picture also shows an o-ring and insulator on the...
This mod is intended to supply the maximum amount of voltage available to the fuel pump, and upgrade the wires when using a Supra pump which usually pulls right around 20 amps, by getting...
Here’s some info on how to swap out the fuel pump in a MKII MR2. This took me at least 8 hours of actual work. I broke it up over a period of about...
Real quick pics of a thermostat change in a MKII T. There are only 2 bolts holding the thermostat in place, but there are some peripheral items that removal of will make the thermostat...
TVIS Disconnect = MID RANGE GRUNT There are really only a few free mods, add this one. Give it a shot, if you don’t like it, switch it back! On hearsay, we disconnected our...
In order to find out what was happening when we switched from normal coolant to NPG+, we installed thermocouples in our cyl heads at the inlet and outlet to track temperatures. Preliminary results below....
A few pictures of an engine being torn down.
I finally saved money to do something with my black car. I’m undecided as to if I should rebuild, or buy a GenIII clip. I really believe the GenII motors are alot less stout...
This part of the engine drop process is a little more intensive than the drop prep. From here on out, it’s helpful to have friend to lend a hand. As always, be sure to...
The intercooler can be tough to get in and out of there. 1. Remove the Intercooler Fan with the 3 bolts. 2. Remove the passenger side Engine Hook. Here it is. 2 medium bolts...
