Invincashield is a product made by 3M. This product goes by other names, and/or is made by other brands (ie Stongard). You can find some info on a MR2 Spyder specific installation here http://www.smiley.net/spyder/invinca.htm It can be ordered at http://www.invinca-shield.com/ They currently do not make a “kit” for the MKII, so you have to special measure the pieces and cut/tailor them yourself. – Tips Installation prep is the key to a good install. In the first picture below, you can see some air bubbles trapped under the film. This is actually a particle of dirt that got under the film. – Pics of Invincashield Installed (partially) on a MKII MR2 Note, this car is DIRTY, it was not installed this way. The kit was only installed on the headlights and top of the hood in these pictures. 
This documentation in no way replaces the Toyota MR2 Repair Manuals. The purpose of this content is only to provide supplementary information to fellow MR2 enthusiasts. Midship Runabout and its contributing authors will not be held responsible for any injury or damages that may occur as the result of practicing any of the methods or procedures described within this website. Article and photo submissions are property of the contributing author.
