Author: Midship Runabout

0
20V 4A-GE / Engines / MK1
28 Aug, 2003

20V Blacktop Swap – Wiring

The most time consuming part of the swap. I was somewhat reluctant about doing this swap because I was afraid of the daunting task of the wiring. However, once I got into it it...

0
20V 4A-GE / Engines / Exhaust / MK1
28 Aug, 2003

20V Blacktop Swap Exhaust

For the exhaust, you need to decide if you want to use the 16V manifold or the 20V. The 20V manifold is a much more efficient design, however involves more customization that the 16V....

0
Engines / MK2
12 Aug, 2003

TVIS Disconnect

TVIS Disconnect = MID RANGE GRUNT There are really only a few free mods, add this one. Give it a shot, if you don’t like it, switch it back! On hearsay, we disconnected our...

0
Coolant / Engines / MK2
11 Aug, 2003

Head Water Temp. Monitoring

In order to find out what was happening when we switched from normal coolant to NPG+, we installed thermocouples in our cyl heads at the inlet and outlet to track temperatures. Preliminary results below....

3S-GTE / MK2
9 Aug, 2003

How To: Remove MR2 Fuel Injectors

Notes and pictures on how to removal the fuel injectors from a 1991 MR2 Turbo.  Start off my removing the X strut tower brace and intake tube connecting the intercooler with the throttle body. ...

MK1 / Suspension & Bracing
12 Jul, 2003

Replace Ball Joint

Here’s a step-by-step guide to replacing the lower ball joints. The pictures below are with the strut assembly removed as I am doing the entire suspension work at the same time & had just...

0
Engines / MK1
6 Jun, 2003

How To: Replace Oil Cooler Hoses

I’ve been waiting till its time to change my oil again to replace the oil cooler hoses, as these guys have been leaking for some time. I decided to replace them with Aeroquip Stainless...