Category: MK3 MR2 Spyder

0

Painted Heatshield

What to do with that rusting heat shield? As good a sports car as Toyota made the Roadster it is by and large an accepted fact the build quality could and should have been...

0

Meshing the Sidevents

Removing the old vents First of all you need to remove the actual plastic vent from your car. It is held in place by three clips along the front edge and two protruding clips/lips,...

0

Soft Top Straps

This can be easily seen by looking at the soft-top when it is folded down fully or by looking in the hood lining when the hood is partially down (See pictures below.) You will...

0

Pelican Racing Front Grill

Heres the one i made from some Foliatec Racing Mesh to start with. The results came out ok, but as you can see after a year or so it looking pretty tatty. So time...

How To: Remove Rear Bumper

(1) – To start with I disconnected the rear lights; this is done by removing the2 screws at the front and side of the main light unit.There is also a small plastic spigot (location...