How To: Remove the Fuel Pump
Removing the fuel pump on the Toyota MR2 requires that the fuel tank be removed. Once the tank is removed, the rest of the process is very straight forward as compared with removing the...
Tagged: remove
Cam Degreeing
Here are some tips and info on how to degree cams for the 3SGTE. This article does not cover cam install, just the degreeing process for aftermarket cams. If you do not degree your...
TRD Member Braces
I just installed the TRD member braces on my car, and have a few bits to add to Whelps “how-to” on Spydermagazine.com First of all the front brace: Its a doddle, if you can...
Side Markers -> Side Repeaters
Here’s a simple mod to update your MR2 to like today’s fancy cars. This will make your side markers flash when your turn signals and hazard lights are on. It will also keep the...
How To: Remove MR2 Turbocharger
Here is a brief document describing how to remove (or rather how I remove) the turbocharger from the MKII MR2. The reason for removing the turbo here is because a couple of the exhaust...
How To: Remove Precat
For those of you that dont know, when designing the MR2 Toyota went down the path of making it a Ultra Low Emissions Vehicle (ULEV). Doing this meant adding a whole load of extra...
20V Blacktop Swap – Miscellaneous Info
Here’s a summary of the smaller things that you will need to do that aren’t big enough for their own page: Fuel line Contrary to what was previously on this page, the 16V fuel...
20V Blacktop Swap – Wiring
The most time consuming part of the swap. I was somewhat reluctant about doing this swap because I was afraid of the daunting task of the wiring. However, once I got into it it...
How To: Remove MR2 Fuel Injectors
Notes and pictures on how to removal the fuel injectors from a 1991 MR2 Turbo. Start off my removing the X strut tower brace and intake tube connecting the intercooler with the throttle body. ...
How To: Install Front Bushing
Going to be replacing all the bushings with the TRD bushing set, while I have my suspension apart. I’ll try to show the removal of the various suspension pieces. Things may be a little...