Precat Information
Whilst the MR2 Roadster has very few flaws as either a fun cheap sports car or as a precision tool to hit the track with, there is one thing that we as a Club...
Author: Midship Runabout
Things to Check Before Buying
” So, you just bought an MR2″, generally what i say when someone new comes down to the workshop after they’ve just purchased their first 2. Then they ask me to put it up...
How To: Change Distributor Cap and Rotor
Here is a quick write up on how to change your distributor cap and rotor. This was done on a 93T with no egr system which may make it a little easier than those of you who still have your egr.
K-Sport Coilovers
I picked up some K-Sport Coilovers from voiceofid on the MR2OC Forums. They have threaded tubes that allow you to raise or lower the car without losing spring/strut travel. The Rebound/Damping adjustments are tied...
How To: Install Engine Lid Fan
For those of you thinking about installing engine lid fans or those of you who have them and just aren’t sure how you want to go about wiring them this may be helpful. There...
Exhaust Controller Valve
In order to quiet down my new exhaust, I picked this up off eBay, almost ordered the 2.25″ one, so make sure you get the right size. The valve opens or closes at the...
V6 How To-A Visual Aid
Removal of the stock motor 3S or 5S. Keep the parts organized, you will be using many on the V6 motor. Things to remember: Cap off coolent hoses Protect fuel lines from contaminants and...
How To: Build an Oil Filter Relocator
Instructions:
There isn’t anything to say that isn’t obvious. Take the stock Toyota oil filter stand- off & cut it in half. Tap (& drill if needed) the channels to accept your hose barbs. Put your sealant around the threads & tighten (15ft-lb, or pretty hand tight is good enough). […]
Solving The Valve Cover Gaskets, Permanently
I didn’t write this for yall, as most of you guys have obviously not experienced leaking valve cover gaskets. (yet) I figured maybe some of you guys doing your swaps could save a lot...
Leak Down Test
Performing a leak down test can be very helpful in determining if piston rings have started to leak, valves are leaking, or if there is a headgasket leak into the cooling system. I purchased...