ATS Racing Axle upgrade
Since I plan to run some quicker times this year, I thought it would be a good idea to pick up a set of Axle upgrade parts from ATS Racing. Axle breaks are common...
Midship Runabout
Supra Fuel Pump Power Mod
This mod is intended to supply the maximum amount of voltage available to the fuel pump, and upgrade the wires when using a Supra pump which usually pulls right around 20 amps, by getting...
How To: Install Rear Swaybar
Rear swaybar install pics from Shane Craddocks White94T (White Gecko).
Oilpan Airflow Mod
The purpose of this mod is to allow the underbody airflow to hit the front of the oilpan, and carry away some of the heat in the oil. The mod was found on a...
TVIS Disconnect
TVIS Disconnect = MID RANGE GRUNT There are really only a few free mods, add this one. Give it a shot, if you don’t like it, switch it back! On hearsay, we disconnected our...
Carboy Coolant Mod
Here are some excellent pictures of a Carboy style modification that was performed on a Series 1 3S-GTE. Results are forthcoming.
4 EGT to 1 Switched Gauge Install
Forward: We do NOT reccommend drilling into your ex. manifold with it on your car. Shane and Pat pulled the motor shortly after, and when Shane pulled the head, he found evidence that this...
How To: Install Crash Bolt
After installing my coilovers, I had near positive camber on my front wheels, and thought it necessary to correct this. There are two way that I know of to do this. #1 is to...
PVC pipe K&N Breather Install
Just a few pics to show the part # and where the breather goes. Also highlighted the plug you need to use. You can buy the Breathers at most Auto Parts Stores that carry...
Invincashield Install
Invincashield is a product made by 3M. This product goes by other names, and/or is made by other brands (ie Stongard). You can find some info on a MR2 Spyder specific installation here http://www.smiley.net/spyder/invinca.htm...