Pelican Racing Front Grill
Heres the one i made from some Foliatec Racing Mesh to start with. The results came out ok, but as you can see after a year or so it looking pretty tatty. So time...
Toyota MR2 Community Archive
Heres the one i made from some Foliatec Racing Mesh to start with. The results came out ok, but as you can see after a year or so it looking pretty tatty. So time...
(1) – To start with I disconnected the rear lights; this is done by removing the2 screws at the front and side of the main light unit.There is also a small plastic spigot (location...
What the kit contains: 2 x Garnish Film Strips (Left & Right Identical) 1 x 3M Adhesion Promoter 1 x Applicator Thoroughly clean the surfaces of the plastic scuff plates with methylated spirits. Treat...
If you haven’t already got your new gaiter, then give Rhonsmr2 a PM on the Forum, or do a search for the [FS] post using “gaiter”. She can do new leather gaiters in different...
Having recently fitted the TTE springs, I thought Iād share the experience and this article briefly describes the process I followed. Disclaimer: I and the club will not accept any responsibility if you follow...
Welcome to another video installation how-to from LoveHorsepower.com! LoveHorsepower Fuel Pressure Regulator Kit Installation Video – Full Resolution – 115MB windows media format. Right click and save as to view. Fuel Pressure Regulator Video...
Welcome to the firist video installation how-to from lovehorsepower.com!! Kirkosaurus Motor Mount Installation Video – Full Resolution – 52MB windows media format. Right click and save as to view. Some pictures from the video,...
This article hopes to describe the tuning process used in the LoveHorsepower Fuel Pressure Regulator and Tuning Video guides. The following equipment was installed: Apex-i S-AFC (Super Air Fuel Controller). LoveHorsepower Fuel Pressure Regulator...
The “proper” way to do a conversion is NOT the only way. THE reason that you have to remove all traces of R-12 in a system is because the introduction of R-134 turns the...
Here is a guide I compiled whilst fitting new front brakes to the front of my roadster at the beginning of the year (only just getting round to putting the guide together ) If...